Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
One of the main difficulties encountered when characterizing the hydrodynamic properties of a fractured aquifer is to identify the preferential flow paths within it. Different methods may be applied to determine the variability of the permeability at the borehole scale and to image the structure of the main flow zones between boreholes. In this paper, we compare the information obtained from different measurement techniques performed in a set of three 100 m depth wells (well-to-well spacing: 5­10 m) in a fractured crystalline rock setting. Geophysical logging and borehole-wall imaging are used to identify open and closed fractures intersecting the boreholes and their orientation. The comparison with flowmeter and single packer tests shows that few of the fractures interpreted as open from geophysical logs are significantly transmissive. Cross-borehole connectivity is first investigated from single packer tests with pressure monitoring in adjacent boreholes. To determine fracture zone connectivity, we propose a methodology simply based on the variation with packer depth of the ratio of the drawdown in the observation well and the drawdown in the pumping well. The results are compared to the analysis of cross-borehole flowmeter tests. We show that both methods provide consistent results with a similar level of information on connectivity.
ISSN: 0022-1694

insu-00221380
https://hal-insu.archives-ouvertes.fr/insu-00221380
DOI : 10.1016/j.jhydrol.2007.07.007

Éditeur(s) : HAL CCSD Elsevier
Résumé : International audience
ODP (Ocean Drilling Program)/IODP (Integrated Ocean Drilling Program) Site 1256 is located on the Cocos Plate in the Eastern Equatorial Pacific Ocean, in a 15 Ma old oceanic lithosphere formed at the EPR during a period of superfast spreading (>200 mm/yr). ODP/IODP Hole 1256D reached for the first time the contact between sheeted dikes and underlying gabbros. It consequently offers a unique opportunity to study in situ, in present-day oceanic crust, the root zone of the sheeted dike complex. This root zone is a thin, 100 m thick boundary layer between the magmatic system (i.e., the axial melt lens, similar to 1100 degrees C), and the overlying high temperature hydrothermal system (<= 450 degrees C). The understanding of interactions within this boundary layer is critical to that of crustal processes along mid-ocean ridges.;This work focuses on the petrophysical characterization of the root zone of the sheeted dike complex in order to further constrain the hydrothermal circulation system in the vicinity of the axial melt lens, as recorded in non-granoblastic dikes, granoblastic dikes, and varitextured gabbros. The petrophysical properties were determined from sample measurements in the laboratory and were compared to in situ downhole geophysical probing. The porosity structure is bipolar, depending on lithology, resulting in a layered system. Non-granoblastic dikes are generally altered in the greenschist fades (similar to>250 degrees C) with relatively high and interconnected (cementation index m similar to 1.72, electrical tortuosity tau similar to 28.3) porosity (1.5%). In contrast, gabbros are retrogressively metamorphosed in the amphibolite (similar to>450 degrees C) and greenschist facies, with lower porosity (1.3%) that involves numerous fissures and cracks, resulting in a more connected medium (m similar to 1.58, tau similar to 11.8) than non-granoblastic dikes. These cracks are more abundant but also tend to close with increasing depth as indicated in downhole geophysical data. Porosity and alteration, as viewed from surface electrical conductivity, appear to be directly correlated.
ISSN: 0040-1951

hal-00544556
https://hal.archives-ouvertes.fr/hal-00544556
DOI : 10.1016/j.tecto.2010.07.013

Éditeur(s) : HAL CCSD
Résumé : This thesis has been conducted on a fractured crystalline basement located in Ploemeur (South of Brittany, France). The detailed study of this basement requires a good understanding of their internal structures, namely their intrinsic properties, flow mode, density and fractures distribution. This work is focused on the petrophysical characterization of the granitic formations. Physical properties were determined from downhole geophysical measurements and images, and petrophysical measurements with thin sections made for each mini-core in the laboratory. Fresh-altered schist and fresh-altered granite separated by a normal angle fault are the main lithology of the Ploemeur crystalline basement. The results showed that the petrophysical properties were function of both porosity variation and degree of alteration and that the pore-space topology was found to be porositydependent. This thesis introduces a new formula between electrical resistivity and porosity. In addition, the laboratory measurements of Ploemeur revealed that seismic wave velocity was a function not only of porosity, but also of the predominant pore type. In general, the pore aspect ratio inverted from velocity measurements were classified roughly into crack shape. In the Ploemeur crystalline basement, the downhole geophysical measurements and images were used to measure changes in physical and chemical properties in the borehole fluid and the bedrock surrounding the boreholes. The effective integration of different geophysical methods, hydrogeological tests and lithological description was the best way to characterize the fractures in the crystalline basement, and is critical for a suitable estimation of fluid circulation.
Le socle cristallin fracturé, situé à Ploemeur (Bretagne sud, France) est l'objet de ce travail de thèse. L'étude détaillée du socle nécessite une bonne compréhension de la structure interne, à savoir les propriétés intrinsèques, le mode d'écoulement, la densité et la distribution des fractures. Ce travail de thèse est consacré à la caractérisation pétrophysique des formations granitiques. Les propriétés physiques ont été déterminées à partir de l'interprétation des données de mesures de géophysique en forage, des images de paroi du puits et des mesures pétrophysiques réalisées sur carottes en laboratoire. Afin de replacer les mesures dans leur contexte lithologique, une lame mince a été analysée pour chaque mini-carotte. Les formations lithologiques rencontrées dans le socle cristallin de Ploemeur sont des schistes et granites sains et altérés, ces deux lithologies étant séparées par une zone de faille. Les résultats ont montré que les propriétés pétrophysiques des roches étaient fonction à la fois de la variation de la porosité et du degré d'altération des roches et que la topologie de l'espace poreux était fortement dépendante de la porosité. Cette thèse introduit une nouvelle formule entre la résistivité électrique et la porosité. De plus, les mesures en laboratoire sur les échantillons de Ploemeur révèlent que les vitesses sismiques ne sont pas seulement fonction de la quantité de porosité, mais aussi fonction de facteur de forme. Ce dernier a été calculé sur les échantillons du socle de Ploemeur à partir des vitesses acoustiques. Les résultats ont montré que la porosité est de forme fissurale. L'intégration des données issues des images optiques et acoustiques, des mesures de géophysique en forage, et de la description des carottes a permis d'étudier de façon détaillée la géologie et l'hydrodynamique du socle de Ploemeur. L'intégration effective de ces différentes méthodes avec les tests hydrogéologiques ressort comme la meilleure façon de caractériser les fractures et les circulations en eau dans le socle.
https://tel.archives-ouvertes.fr/tel-00444175

Droits : info:eu-repo/semantics/OpenAccess
tel-00444175
https://tel.archives-ouvertes.fr/tel-00444175
https://tel.archives-ouvertes.fr/tel-00444175/document
https://tel.archives-ouvertes.fr/tel-00444175/file/thesebelghoul.pdf